92
3
Taking Pictures
1
Press the four-way controller (5)
in A mode.
The [Focus Mode] screen appears.
The focus mode changes each time the
button is pressed. You can also change the
setting using the four-way controller (23).
2
Press the 4 button.
The setting is saved and the camera returns to capture mode.
The procedure for setting the focus manually (\) is described below.
1
Press the four-way controller (5) in A mode.
The [Focus Mode] screen appears.
2
Use the four-way controller (5) to select \.
3
Press the 4 button.
The central portion of the image is magnified to full screen on the display.
4
Press the four-way controller
(23).
The \ indicator appears on the display to
indicate the approximate distance to the
subject. Use the four-way controller (23)
to adjust the focus using the indicator as a
guide.
2 for distant focus
3 for closer focus
• The selectable function differs depending on the shooting mode. Refer to
“Functions Available for Each Shooting Mode” (p.220) for details.
• The noise from focusing is recorded when a focus mode other than 3 or
s is selected in C (Movie), (Underwater Movie) and (High Speed
Movie) modes.
• When [Auto Macro] is on and shooting with q selected, if the subject is
further than 60 cm away, the camera automatically focuses to ∞ (Infinity).
Saving the Focus Mode setting 1p.120
To Set the Manual Focus
MENU
To Next Page
Loading...
Need help?
General
