Peri UP Flex - C5 Ballast

43
C5 Ballast
Table C5.01
For smaller scaffolding dimensions, no additional ballast is required.
Required ballast for the PERI UP Flex Reinforcement Scaffold 75 and 100 with working wind speed
according to DIN EN 12811.
Fig. C5.01
Scaffold width 75 cm Scaffold width 100 cm
Bays 1 bay 1 bay Bays
Height / bay
length [cm]
150 200 250 150 200 250 300 Height / bay
length [cm]
224 – 260 - - - 40 kg 40 kg40 kg40 kg 224 – 260
424 – 460 160 kg - - 160 kg - - - 424 – 460
624 – 660 400 kg 120 kg - 400 kg 80 kg - - 624 – 660
824 – 880 760 kg 320 kg - 840 kg 320 kg - - 824 – 880
1024 – 1080 116 0 kg 560 kg 160 kg 1280 kg 640 kg 200 kg - 1024 – 1080
Ballast
PERI UP Flex Reinforcement Scaffold 75 and 100
Instructions for Assembly and Use – Standard Configuration