Peri UP Flex - A4 Dismantling; Recommendation

24
A4 Dismantling
Recommendation
Warning
Risk of falling!
 During work operations, keep the
hatch closed.
 Use PPE to prevent falling.
Following the completion of his own
risk assessment, the scaffold contrac-
tor can also determine other disman-
tling options.
Dismantling takes place from top to
bottom, with personnel always in a
safe position.
Dismantling is carried out whilst pro-
gressively working back to the access
ladder bay.
Dismantling procedure
1. From a position on the decking
level:
– Ledger UH 75 opposite the hatch
(Fig. A4.01a)
– Ledger UH on the inside and Toe-
boards (Fig. A4.01b)
– Ledger UH on the outside, from a
safe position (Fig. A4.01c)
– Ledger Brace UBL - top - bottom
– Ledger UH on the inside, from a safe
position (Fig. A4.01d)
2. From a position on the ladder:
– Ledger UH on the outside
– Close hatch from below (Fig. A4.02)
Fig. A4.01d
Fig. A4.02
Fig. A4.01bFig. A4.01a
Fig. A4.01c
1.
1.1
1.3
1.2
1.4
2.
PERI UP Flex Reinforcement Scaffold 75 and 100
Instructions for Assembly and Use – Standard Configuration