Sewing
10 - 7
10
.03.02 Selecting the garment size
Based on the programmed basic size, in programmed sewing it is possible to select a
garment size. The seam sections, which were given a graduated value during programming,
are converted to the new size.
● Call up the menu for selecting the garment size.
● Select the desired garment size.
● Confirm selection and exit selection menu.
10.03.03 Program interruption
With the "program interruption" function the programmed seam sequence is interrupted (e.g.
if the thread breaks).
● Interrupt program sequence.
● If necessary, tact forwards or backwards through the sections of the seam program.
● If necessary, change the values and carry out the other functions as in manual sewing,
see Chapter 10.01 Manual sewing.
● If necessary, call up programmed sewing again..
To Next Page
Loading...
