Input
11 - 4
11.01.02 Seam program input with the "Creating/adjusting a program" function
With this function the seam program is entered by entering or changing the appropriate
values on the control panel. This type of seam program input is particularly suitable for
adjusting existing seam programs.
● Switch on the machine.
● Select a program number from 3 – 49, see Chapter 9.07 Selecting a program number.
● Call up the input mode.
● Call up the "Creating/adjusting a seam program" function.
● Carry out the basic settings and conclude with the "Enter" function, see Chapter 11.01.01
Basic setting for seam program input.
● These functions are used to scroll through the current seam program.
The current seam section is displayed accordingly, in addition to all the other current
values.
● This function is used to call up the menu for entering the placement stitch at the
beginning of the seam.
● Adjust the fullness, see Chapter 9.08 Inputting fullness.
● Change maximum speed for the current seam section.
● Change the number of stitches for the seam section.
The length of the seam section results from the number of stitches and the fullness
value. After sewing the number of stitches entered, in programmed sewing the machine
switches to the next seam section.
1
To Next Page
Loading...
