Input
11 - 8
11.02 Examples of how to create seam programs
11.02.01 Example of a seam program input using the
"Creating/adjusting a program" function
The seam program to be created should
- to begin with only consist of the right sleeve seam,
- have 2 seam sections,
- be based on the basic size 50 (German men’s sizes) and
- be stored under the program number "4" with the comment "PROG".
● Switch on the machine.
● Call up the input mode.
●
Call up the "creating/adjusting a seam program" function and enter program number "4".
● Set basic size "50".
● Set the seam type (right seam) by pressing until the appropriate symbol appears.
● Call up the menu for comment input.
● Enter the comment "PROG" with the keyboard and number panel.
● Conclude the comment input.
● Change to the input of the first seam section.
To Next Page
Loading...
