Input
11 - 1
11 Input
In the input mode the functions parameter input, information, creating/adjusting a sewing
program, teach-in, program administration and service are available.
● Switch on the machine.
● Call up the input mode.
Explanation of the functions
Sewing mode
Quit the input mode and call up the sewing mode.
Parameter selection
Select the hundred and unit figures of the desired parameters, see Chapter 13.08.02
Example of a parameter input.
Altering the parameter value
Change the value of the selected parameter, see Chapter 13.08.02 Example of a
parameter input.
Software information
Calls up information about the current machine software.
Creating/adjusting a program
Opens the menu for entering or altering a seam program, see Chapter 11.01.02 Seam pro-
gram input with the "Creating/adjusting a program" function.
Teach In
Opens the menu for entering seam programs after sewing a sample, see Chapter 11.01.03
Seam program input with the "Teach in" function.
Program administration
Opens the menu for seam program administration, see Chapter 11.03 Seam program
administration.
Service
Opens the service menu, see Chapter 13.13 Service menu.
To Next Page
Loading...
Need help?
General
