Input
11 - 10
● Activate the "end of program" function.
● Conclude the seam program and change to programmed sewing.
11.02.02 Example of a seam program input using the "teach-in" function
The seam program to be created should
- to begin with only consist of the left sleeve seam,
- have 2 seam sections,
- be based on the basic size 6 (American ladies’ sizes) and
- be stored under the program number "11" with the comment "TEACH".
● Switch on the machine.
● Select program number "5", see Chapter 9.07 Selecting a program number.
● Call up the input mode.
● Call up the "teach-in" function and enter program number "11".
● Set basic size "6".
● Set the seam type (only right seam) by pressing until the appropriate symbol appears.
To Next Page
Loading...
