Input
11 - 3
● If applicable, enter or change a comment.
● Set the seam type (by pressing the appropriate symbol several times until the appropriate
seam type is displayed).
Description of the symbols:
Sewing program with left and right seam, beginning with the right seam.
Sewing program with left seam only.
Sewing program with right seam only.
Sewing program with left and right seam, beginning with the left seam.
● Conclude the input of the basic settings and change to the seam section input, see
Chapter 11.01.02 Seam program input with the "Creating/adjusting a program"
function or Chapter 11.01.03 Seam program input with the "Teach in" function.
The input can also be concluded by calling up the sewing mode. In this case the
seam program input is concluded and the machine changes to programmed
sewing.
To Next Page
Loading...
Need help?
General
