Directions For Use
EN 10 DVDR70 & DVDR75/0x13.
EMPTYDISC The disc inserted is either new or has been completely erased (no
recordings).
PROTECTED The disc is protected against recording.
MAX TITLE The maximum number of titles per disc has been reached. The
maximum number of titles per disc is 48.
MAX CHAP The maximum number of chapters per title/disc has been reached. The
maximum number of chapters per title is 124.
DISC FULL The disc is full. There is no space for new recordings
PAL DISC A disc with PAL recordings has been inserted. The machine is trying to
record an NTSC signal. Insert a new disc or one that contains NTSC
recordings.
NTSC DISC A disc with NTSC recordings has been inserted. The machine is trying
to record a PAL signal. Insert a new disc or one that contains PAL
recordings.
RECORDING An illegal action (e.g. OPEN/CLOSE J button) was attempted during
recording.
FREETITLE Playback was started for an empty title or the following title is empty.
DISC LOCK An attempt has been made to record during playback of a protected
disc. This message appears if an attempt is made to insert a chapter
marker ( FSS & button).
DISC ERR An error occurred when writing the title. If this error keeps occurring,
please clean the disc or use a new one.
For instructions on how to clean a disc see the section on 'Cleaning the
discs' in the next chapter.
DISC WARN An error occurred when writing the title. Recording was continued; the
error was skipped
SETUP After the automatic search the menu for setting the date/time will
appear on the screen.
WAIT 01 During the automatic search the TV channels found are counted
BLOCKED The disc tray cannot be closed/opened.
SAFE REC The new recording will be added at the end of all the other recordings
(SAFE RECORD).
EASYLINK Data is being transferred from the 'EasyLink' TV.
POST-FORMAT Post format
IIIIIIIIIIIIIII
Disc bar: Displays the current position on the disc (disc pointer).
Play/Record: Single flashing segment at the current position.
Pause: Flashing segment on both sides of the current position.
Stop: Illuminated segment at the current position.
SAT
A satellite recording has been programmed.
TIMER
A recording (timer) has been programmed
o(((
A remote control signal has been received
VPS/PDC
Video programming system / programme delivery control: A VPS or
PDC code will be transmitted for the selected TV program
LANG II
During playback a HiFi/2 channel tone was detected or a HiFi/2 channel
tone was received. 'I' or 'II' lights up depending on which sound channel
has been selected
Messages in the DVD recorder display
READING
The following messages may appear in your DVD recorder display
IS TV ON? The DVD recorder is in initial installation mode. Switch the TV on, then
read the paragraph on 'Initial installation' in 'Installing your DVD
recorder'.
NO SIGNAL No input signal available (signal inadequate or unstable)
MENU The menu on the screen is active
OPENING Disc tray opening
TRAY OPEN Disc tray open
CLOSING Disc tray closing
READING Disc being read
MENU UPDT Once recording has been successfully completed the table of contents is
created.
INIT MENU The menu structure is created after the first recording has been made
on a new disc
COPY PROT You have tried to copy a copy-protected DVD/video cassette.
WAIT Please wait until this message disappears. The DVD recorder is busy
performing a task.
NO DISC A disc has not been inserted for recording. If a disc has been inserted, it
cannot be read.
INFO
Information about the inserted DVD is displayed on the screen
BUSY The DVD recorder is processing the changes to make them DVD
compatible
ERASING The entire disc is erased
ENGLISH
To Next Page
Loading...
