Directions For Use
EN 42 DVDR70 & DVDR75/0x13.
74
Authorising a disc
1 Insert a disc. The access control box will appear after a short delay.
2 Using CH+ A or CH- B select 'Play once'or'Play always'.
3 Enter your PIN code using the number buttons 0..9 .
Double-sided DVDs may have a different ID for each side. For these discs, each side must be
authorised. Multi-volume video CDs may have a different ID for each volume. For these CDs,
each volume must be authorised.
Locking unlocked discs
To lock a disc that was formerly authorised follow the instructions below
1 Insert a disc. Playback starts automatically. If the playback does not
start automatically, press PLAY G .
2 Press the STOP h button while the '
' icon is visible. The icon
changes to '
'. The disc is now locked.
Parental level control (DVD video only)
Films on pre-recorded DVD discs may contain scenes not suitable for children. Therefore, some
discs may contain 'Parental Control' rating information that applies to the entire disc or to
certain scenes on the disc.
The appropriate scenes have filter values that reach from 1-8. If such a scene is detected during
playback, the filter value set on the DVD recorder is compared to the scene. If the filter value is
higher than the setting, an alternative scene will be played (if available).
Most DVDs apply the rating to an entire DVD. Therefore, if certain scenes exceed the rating
you select, the entire disc will be blocked from viewing.
Access control (Child Lock)
73
L
Access control (Child Lock)
Child lock (DVD and VCD)
This feature enables discs to be locked for children.
When Child Lock is on, a 4-digit code (PIN) needs to be entered before a disc can be played.
You can also decide whether the inserted disc should always be played or should be played only
once, despite the child lock
•)'Play always':
This disc is stored in a memory with space for 50 child-safe discs. If more than 50 discs are
stored, the last disc in the list is removed and the new disc is added. The screen shows 'Child
safe' at the start of playback.
•)'Play once':
This disc is only authorised for single playback. If the recorder is switched off, the PIN code
must be re-entered.
Activating/deactivating child lock
1 Switch on the TV set. If required, select the programme number for
the DVD recorder.
2 Switch on the DVD recorder using STANDBY/ON m .
3 Press SYSTEM-MENU . The menu bar appears
4 Select the '
A
' icon using D or C .
5 Select '
(Disc features)' using CH- B or CH+ A and confirm
with C .
6 Confirm 'Access control' using C .
7 Enter a 4-digit code of your choice. If the code is new, you may have
to enter the code a second time as confirmation.
8 Select 'Child lock' using CH+ A or CH- B and confirm with C .
9 Select the '
' icon using CH- B or CH+ A .
0 Confirm with OK .
A Quit the feature using D and SYSTEM-MENU .
Unauthorised discs can only be played by entering the four-digit PIN code.
To deactivate the child lock, select the '
' icon in 9 .
ENGLISH
Access control (Child Lock)
To Next Page
Loading...
