Diagnostic Software
EN 72 DVDR70 & DVDR75/0x15.
Display and Control Board (DCB)
Example DS:> 925
The entirely disc will be erased.
Are you sure you want this?[y/n]
092500:
Test OK @
Nucleus Name DS_BE_RegionCodeSet
Nucleus Number 928
Description Set the region code in the AV3.
User Input Region code
Example DS:> 928 1
092800:
Test OK @
DS:> 928 This nucleus is not supported by the engine
092800:
Test OK @
Nucleus Name DS_BE_RegionCodeGet
Nucleus Number 929
Description Read the region code from the AV3.
User Input None
Example DS:> 929
092900: DVD region 1
Test OK @
DS:> 929This nucleus is not supported by the engine
092900:
Test OK @
Nucleus Name DS_BE_RegionCounterReset
Nucleus Number 930
Description Reset the region counter in the AV3.
User Input None
Example DS:> 930
093000:
Test OK @
DS:> 930 This nucleus is not supported by the engine
093000:
Test OK @
Nucleus Name DS_DCB_CommunicationEcho
Nucleus Number 1000
Description Check the communication between the digital board and the DCB by issuing an echo
command
User Input None
Example DS:> 1000
100000:
Test OK @
Nucleus Name DS_DCB_VersionGet
Nucleus Number 1001
Description Get the version of the DCB
User Input None
Example DS:> 1001
100100: DCB version: 13
Test OK @
Nucleus Name DS_DCB_LightDisplay
Nucleus Number 1002
Description Light the entire display of the DCB, and clear the display after confirmation.
User confirmation is necessary.
User Input None
To Next Page
Loading...
