AXC F X152
94 / 112
PHOENIX CONTACT 107708_en_08
Vibration (storage/transport) 5g
Shock 30g, 11 ms period, half-sine shock pulse, in accordance with
IEC 60068-2-27
Shock (operation) 10g (bump endurance test in accordance with
DIN EN 60068-2-27)
Ambient conditions
Processor
Processor ARM
®
Cortex
®
-A9
AXC F 2152: 2x 800 MHz
AXC F 1152: 1x 800 MHz
Connection data
Designation Axioline F connector
Connection method Push-in connection
Conductor cross section rigid/flexible 0.2 mm² ... 1.5 mm²
Conductor cross section [AWG] 24 ... 16
Stripping length 8 mm
Axioline F local bus interface
Number of interfaces 1
Connection method Bus base module
Transmission speed 100 Mbps
Electrical isolation No
Number of supported devices Max. 63
Ethernet interface
Number of interfaces 2
Connection method RJ45 jack
Note on the connection method Auto-negotiation and auto-crossing
Bus system RJ45
Number of channels 2
Transmission speed 10/100 Mbps (full duplex)
Transmission length 100 m, max.
Transmission physics Ethernet in RJ45 twisted pair
System limits
Amount of process data 8192 bits, maximum (per station)
4096 bits, maximum (input)
4096 bits, maximum (output)
To Next Page
Loading...
Need help?
General
