EasyManua.ls Logo

Phoenix Contact AXC F 3152 - Page 97

Phoenix Contact AXC F 3152
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ordering data and technical data
107708_en_08 PHOENIX CONTACT 97 / 112
Approvals
For the current approvals, please visit phoenixcontact.net/products.
UL: Additional information
Overvoltage category 2
Pollution degree 2
Operating mode Indoor use
Minimum temperature rating and size of the cables to be
connected to the field wiring terminals
Min. 75°C and 24 ... 16 AWG
All types are intended to be used in final safety enclosure, which shall conform with requirements for pro-
tection against the spread of fire and shall have adequate rigidity acc. to UL 61010-1 & UL 61010-2-201.
If the device is used in not specified manner, the protection provided by the device may be impaired.
The supply source and ext. circuits intended to be connected to this device shall be galv. separated from
mains supply or hazardous live voltage by reinforced or double insulation and meet the requirements of
SELV circuit of UL/IEC 61010-2-201 and clause 9.4 Limited energy circuit of UL/IEC 61010-1 or
NEC Class 2.

Table of Contents

Other manuals for Phoenix Contact AXC F 3152

Related product manuals