EasyManua.ls Logo

PIAGGIO MSS X9 EVOLUTION 250 - Hub Oil

PIAGGIO MSS X9 EVOLUTION 250
262 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- Install the spark plug, tighten by hand and then
lock it by the special wrench at the prescribed tor-
que.
CAUTION
THE SPARK PLUG MUST BE REMOVED WHEN THE MO-
TOR IS COLD. THE SPARK PLUG MUST BE REPLACED
EVERY 12,000 KM. THE USE OF NON CONFORMING IGNI-
TION CONTROL UNITS OR SPARK PLUGS OTHER THAN
THOSE PRESCRIBED CAN SERIOUSLY DAMAGE THE EN-
GINE.
Characteristic
Spark plug: electrode distance
0.7 mm ÷ 0.8 mm
Electric characteristic
Recommended spark plug:
CHAMPION RG4HC
Locking torques (N*m)
Spark plug 12 ÷ 14
Hub oil
Check
Level check:
- Move the vehicle to a flat ground and rest it on the stand.
- Unscrew the oil bar, dry it with a clean cloth and reinsert it, screwing it in thoroughly.
- Extract the bar and check that the oil level reaches the second notch of the bar from the bottom.
- Screw the oil bar back on, checking that it is tightly in place.
Recommended oil: TUTELA ZC 90
Tightening torque:
Drainage cap: 15 - 17 N·m
Maintenance MSS X9 Evolution 250
MAIN - 38

Table of Contents

Related product manuals