Front central cover
- To disassemble the front centre cover, it is nec-
essary to first unscrew the screws «A» shown in
the figure (2 per side) and remove them together
with the right and left mirrors. You have to remove
the rubber cover plugs in order to get to the
screws.
- Remove the 2 centre screws «B»
- Remove the lower screw «C» found under the
optical unit
Flyscreen
Unscrew the 3 screws retaining the upper wind-
screen with the relative spacers;
- Remove the upper windscreen
- Extract the 6 plastic plugs and remove the pro-
tective rubber covers of the windscreen supports
together with the central adjustment flange in order
to get to the 2 upper fastenings of the lower wind-
screen.
MSS X9 Evolution 250 Chassis
CHAS - 213
To Next Page
Loading...
