PIAGGIO MSS X9 EVOLUTION 250 - Refitting the Rocker-Arms Cover; Refitting the Intake Manifold; Crankcase - Crankshaft

Refitting the rocker-arms cover
- Refit the cylinder head cover, tightening the 5
clamping screws to the prescribed torque.
- Make sure the gasket is positioned properly.
Locking torques (N*m)
Tappet cover screws 6 - 7 Nm
Refitting the intake manifold
Fit the intake manifold and do up the three screws.
Crankcase - crankshaft
Engine MSS X9 Evolution 250
ENG - 128