EasyManua.ls Logo

PIAGGIO MSS X9 EVOLUTION 250 - Data Check Function; Sealed Battery

PIAGGIO MSS X9 EVOLUTION 250
262 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To reset one of the icons, press the «Reset»
button for less than a second, then on the icon
before that to be reset press «Reset» for at
least 3" so as to display:
- The selectionj of the desired icon through the
relevant solid light.
- The flashing of this light confirms the reset.
- For example, to reset the «Service» icon, go to
«Oil» and press the «Reset» button for at least 3".
To reset «Oil», repeat the above procedure going
to «Belt».
This procedure must be repeated since the selec-
tion of the icon and its reset are operations to be
made at the same time (it is not possible to view
the desired function and reset by two different but-
ton pressures since in this way the next icon would
be reset).
Data check function
Date and check function
Date should be adjusted out when delivering the vehicle to the customer. This is because the clock
activation starts the year count for the "Service" function. If the clock has been previously activated,
reset the "Oil", "Service" and "Belt" functions. The calendar is programmed from 2000 to 2050. For date
and time adjustment act on the "Clock" and "Set" buttons.
To guarantee vehicle safety, each time the key switch is set to "ON", there is an automatic checking of
all the indicators on the digital section.
The digital section provides also a functional checking of the 4 analogue instruments and of the turn
indicator control. To activate this checking, press and holed the "Clock" and "Set" buttons simultane-
ously and then set the key switch to "ON". Within 4 seconds max, the software version is displayed, the
gauges go to the end of scale and the turn indicators light up.
At the end of the operation above, the normal warning light bulbs check is carried out.
Sealed battery
If the vehicle is provided with a sealed battery, the only maintenance required is the check of its charge
and recharging, if necessary.
These operations should be carried out before delivering the vehicle, and on a six-month basis while
the vehicle is stored in open circuit.
Electrical system MSS X9 Evolution 250
ELE SYS - 72

Table of Contents

Related product manuals