Measurement condition of IC402 :
Play style: Normal style + PC
(Conditions where the control unit and the drive unit are connected and where the PC on which the USB driver
dedicated to the MEP-7000 has been installed is connected)
Measurement mode : Idling (State when the AC power is set to ON)
Pin No. Voltage(V) Pin No. Voltage(V) Pin No. Voltage(V) Pin No. Voltage(V)
10.80 172.90 332.50 490.80
20.20 18 2.90 34 0.50 50 0.25
3 0.20 19 0.50 35 3.30 Vin 51 0.20
4 0.20 20 2.20 36 3.30 52 0.60
5 3.30 Vin 21 3.30 Vin 37 3.30 53 2.50 Vin
60.20 222.8038 0.00 54 0.00 G
70.80232.3039 N.C. 55 3.30 Vin
8 0.80 242.30 400.00 560.30
90.80 252.70 413.30 570.20
10 2.50 Vin 26 1.00 42 2.50
Vout
58 0.20
11 3.30 27 1.00 43 3.30 Vin 59 0.20
12 3.30 28 0.00 G 44 0.00 G 60 1.60
13 3.30 29 2.50 Vin 45 3.30 Vin 61 0.00 G
14 2.90 30 3.30 46 5.00 62 2.50 Vin
15 0.00 G 31 3.10 47 3.30 63 2.50
16 2.90 32 0.00 48 0.00 64 0.00
NMAIN ASSY (CONTROL UNIT)
Pin No. Voltage(V) Pin No. Voltage(V) Pin No. Voltage(V) Pin No. Voltage(V)
1 3.30 1 3.30 1 0.60 1 3.30 Vin
2 5.00 Vin 2 3.30 Vin 2 0.60 2 0.00 G
3 0.00 G 3 0.00 G 3 5.90 3 3.04
4 N.C. 4 1.20 Vout 4 4.60 4 N.C.
52.60 50.80 5 7.60 Vin 5 2.50 Vout
60.00G
71.20
8 1.24
Pin No. Voltage(V) Pin No. Voltage(V) Pin No. Voltage(V) Pin No. Voltage(V)
1 0.00 1 0.50 1 0.00 G 1 3.30 Vin
2 1.25 2 0.50 2 5.00 Vin 2 2.98 Vout
3 5.00 3 4.43 3 5.00 3 2.98 Vout
4 0.00 G 4 3.60 4 5.00 4 1.25
5 5.00 5 5.00 Vin 5 3.31 Vout 5 0.00 G
6 5.00 Vin 6 0.00 G 6 0.00 6 3.30
7 5.00 7 1.14 7 0.00 G
8 1.90 8 1.25 8 3.31
Pin No. Voltage(V)
12.98 Vin
20.00G
32.98
4 N.C.
51.50Vout
IC1602 BH15LB1WG
REGULATOR IC
IC807 BD8152FVM
DC/DC
IC810 R1232D331A
DC/DC
IC1601 BH30MA3WHFV
REGULATOR IC
IC809 BD9306AFVM
DC/DC
IC402 TDOTG242-0F0C8
USB CONTROLLER
IC803 BH25FB1WG
REGULATOR IC
IC600 BU4242G
RESET IC
IC611 BD00KA5WFP
REGULATOR IC
IC802 BD9306AFVM
DC/DC
CONTROL UNIT