3. Make sure that the seal/no seal lever is set to the seal position (all the way to the left).
4. Place the envelopes on the feed deck. Tap Start on the Envelope Printing or Print on Envelopes
screen.
If the moistener tank is full and your envelopes do not seal correctly, clean or replace the moistener
brush and wick.
Zeroing the scale
Zero the scale to set the weight to zero.
Make sure there is nothing on the scale when you zero it.
Printing on envelopes
Pitney Bowes Operator Guide April 2022 136
To Next Page
Loading...
