3. Make sure that the seal/no seal lever is set to the seal position (all the way to the left).
4. Place the envelopes on the feed deck. Tap Start on the Envelope Printing or Print on Envelopes
screen.
If the moistener tank is full and your envelopes do not seal correctly, clean or replace the moistener
brush and wick.
Filling the moistener tank
Your device will need refills of E-Z Seal® in order to seal envelopes. Follow these steps to fill the
moistener tank.
Quick start guide
Pitney Bowes Operator Guide April 2022 39
To Next Page
Loading...
