Pitney Bowes SendPro C Auto - Printing a Test Pattern

2. Turn the paper jam lever clockwise to drop the deck and remove the tape.
3. Turn the jam lever back to the locked position.
4. Replace the tapes in the tape slot on top of the feeder. Make sure the printable side faces to the
right (toward the touch screen). Tap Tape to continue.
Printing a test pattern
Print a test pattern to see if the printhead is working properly or if you have enough ink in the cartridge.
1. Tap Settings.
2. Scroll down and tap Envelope Printer Maintenance.
3. Tap Print Test Pattern.
4. Insert the envelope into the device when the message "Print a Test Pattern?" appears.
Maintenance
Pitney Bowes Operator Guide April 2022 180