2. Find your label in the list or by using the search box.
3. Tap on the shipment.
4. Tap Create Return Label.
5. Tap Continue through the screens to confirm the Sender and Recipient name and address.
6. If necessary, confirm the size and weight of the item.
7. Continue with Printing a shipping label.
Printing a USPS scan form
The purpose of USPS Shipment Confirmation Acceptance Notice (SCAN) Form 5630 is to save time.
Without SCAN Form 5630, the USPS needs to scan each individual shipping label. This can be time
consuming if there are a large number of shipping labels. Instead of scanning each individual shipping
label, USPS scans the SCAN Form 5630 once and uploads every shipping label from that day to the
USPS systems.
In order to print USPS SCAN forms, you must enable the USPS SCAN Form Printing on your device.
1. Tap Settings.
2. Scroll down to Shipping Settings, then tap Label Options.
3. Scroll down to the Scan Form and Manifest Printing section and tap on the Enable scan form
printing box.
l
If you have an 8 1/2 x 11 1E50 Laser Report Printer that is either attached to one of the USB
ports on the back of your device or connected through Wi-Fi, you can print the report from your
device. Refer to Printing from your device.
l
If you do not have the report printer, you can print the manifest by signing into your SendPro
Online or PitneyShip account. Refer to Printing from SendPro Online or PitneyShip account.
Printing from your device.
1. Tap Envelope Printing or Print on Envelopes on the Home screen.
2. From the Carrier Home screen, tap Shipping Manifests.
3. Tap USPS SCAN Form. The number of shipments included in the manifest appear.
Printing Shipping Labels
Pitney Bowes Operator Guide April 2022 98
To Next Page
Loading...
