Setting the default preset reset timer
The default preset timer will reset your device to your most commonly-used settings. By default, the
preset timer resets your device after one minute of inactivity. You can change this time if necessary.
1. Tap Settings.
2. Scroll down to the Envelope Printer Settings section.
3. Tap Postage Refills.
4. Tap Default Preset Timer.
5. Use the slider to set the time between 1 and 9 minutes.
6. To save the value and exit the screen, tap the back arrow or Home.
Managing Printing on Envelopes
Pitney Bowes Operator Guide April 2022 167
To Next Page
Loading...
