User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
Mirror Port Configuration
The Port Mirror Configuration screens in Figure 4-3-9 and Figure 4-3-10 appear.
Figure 4-3-9: Port Mirroring Settings Page Screenshot
The page includes the following fields:
Object Description
• Session ID
Set the port mirror session ID. Possible ID are: 1 to 4.
• Monitor Session State
Enable or disable the port mirroring function.
• Destination Port
Select the port to mirror destination port.
• Allow-Ingress
Frames from ports that have either source (rx) or destination (tx) mirroring enabled are
mirrored to this port.
• Sniffer RX Ports
Frames received at these ports are mirrored to the mirroring port. Frames transmitted are
not mirrored.
• Sniffer TX Ports
Frames transmitted from these ports are mirrored to the mirroring port. Frames received
are not mirrored.