Planet MGSW-28240F User Manual

User’s Manual of MGSW-28240F
26
1.3 How to Use This Manual
This User Manual is structured as follows:
Section 2, INSTALLATION
The section explains the functions of the Managed Switch and how to physically install the Managed Switch.
Section 3, SWITCH MANAGEMENT
The section contains the information about the software function of the Managed Switch.
Section 4, WEB CONFIGURATION
The section explains how to manage the Managed Switch by Web interface.
Section 5, COMMAND LINE INTERFACE
The section describes how to use the Command Line interface (CLI).
Section 6, CLI MODE
The section explains how to manage the Managed Switch by Command Line interface.
Section 7, SWITCH OPERATION
The chapter explains how to do the switch operation of the Managed Switch.
Section 8, TROUBLESHOOTING
The chapter explains how to do troubleshooting of the Managed Switch.
Appendix A
The section contains cable information of the Managed Switch.
Appendix B
The section contains glossary information of the Managed Switch.

Planet MGSW-28240F Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	56 Gbps
MAC Address Table	8K
Jumbo Frame	Up to 9K bytes
Weight	2.5 kg
Uplink Ports	4 x 1G SFP
Power Supply	Internal power supply, 100-240V AC, 50/60Hz
Power Consumption	20W
Operating Temperature	0 to 50 °C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)
Dimensions (W x D x H)	440 x 200 x 44 mm
Switch Architecture	Store-and-Forward