Planet MGSW-28240F - Security Switch SNMP Trap Version

User’s Manual of MGSW-28240F
441
Syntax:
Security Switch SNMP Trap Mode [enable|disable]
Parameters:
enable : Enable SNMP traps
disable: Disable SNMP traps
(default: Show SNMP trap mode)
Default Setting:
disable
Example:
Enable SNMP trap mode.
MGSW
-28240F:/>security switch snmp trap mode enable
Security Switch SNMP Trap Version
Description:
Set or show the SNMP trap protocol version.
Syntax:
Security Switch SNMP Trap Version [1|2c|3]
Parameters:
1 : SNMP version 1
2c: SNMP version 2c
3 : SNMP version 3
(default: Show SNMP trap version)
Default Setting:
1
Example:
Set SNMP trap version in version 2c.
MGSW
-28240F:/>security switch snmp trap version 2c