Planet MGSW-28240F - SMTP Configuration

User’s Manual of MGSW-28240F
80
4.2.14 SMTP Configuration
Configure SMTP Configuration on this page. The SMTP Configuration screen in Figure 4-2-17 appears.
Figure 4-2-17: SMTP Configuration Page Screenshot
The page includes the following fields:
Object
Description
• SMTP Mode
Enabled
It is for you to enable SMTP mode function. This mode offers you to configure
SMTP server and SMTP account information, system will refer it to send an
E-mail for alarm noticing
• SMTP Server
It is for you to set up a specify SMTP server DNS name or IP address. If it is
inputted a DNS name, please remember to input DNS server IP address at IP
configuration page.
• SMTP Port
It is for you to input the SMTP server port number. As default is "25".
• SMTP Authentication Enabled
As usual SMTP server is denied to relay a mail from a different domain, so you
have to enable this option and input your mail account and password for SMTP
sever authorizing to forward a mail from different domain.
For example, you want a SMTP server which located on mail.123.com send a
mail to mail.456.net.com.
If you want to send the mail to a SMTP server which located on the same domain
or the same SMTP server, you don't have to enable SMTP authentication.
• Authentication User
Name
It is for you to input your mail account name.
• Authentication
Password
It is for you to input your mail account password.
• E-mail From
It is for you to input who send this mail.