Planet MGSW-28240F - CPU Load

User’s Manual of MGSW-28240F
75
• Receive Bad Remote
ID
The number of packets whose Remote ID option did not match known Remote
ID.
Client Statistics
Object Description
• Transmit to Client
The number of relayed packets from server to client.
• Transmit Error
The number of packets that resulted in error while being sent to servers.
• Receive form Client
The number of received packets from server.
• Receive Agent Option
The number of received packets with relay agent information option.
• Replace Agent Option
The number of packets which were replaced with relay agent information option.
• Keep Agent Optin
The number of packets whose relay agent information was retained.
• Drop Agent Option
The number of packets that were dropped which were received with relay agent
information.
Buttons
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediately.
: Clear all statistics.
4.2.10 CPU Load
This page displays the CPU load, using a SVG graph.
The load is measured as average over the last 100ms, 1sec and 10 seconds intervals. The last 120 samles are graphed, and
the last numbers are displayed as text as well.
In order to display the SVG graph, your browser must support the SVG format. Consult the SVG Wiki for more information on
browser support. Specifically, at the time of writing, Microsoft Internet Explorer will need to have a plugin installed to support
SVG. The CPU Load screen in Figure 4-2-13 appears.