User’s Manual of MGSW-28240F
Security Switch SNMP User Lookup
Description:
Lookup SNMPv3 user entry.
Syntax:
Security Switch SNMP User Lookup [<index>]
Parameters:
<index>: entry index (1-64)
Example:
Lookup SNMPv3 user entry
-28240F:/>security switch snmp user lookup
User Name Level Auth Priv
--------- -------------------------------- -------------- ---- ----
1 Remote admin_snmpv3 Auth, Priv MD5 DES
Security Switch SNMP Group Add
Description:
Add or modify SNMPv3 group entry.
The entry index key are <security_model> and <security_name>.
Syntax:
Security Switch SNMP Group Add <security_model> <security_name> <group_name>
Parameters:
<security_model>: v1 - Reserved for SNMPv1
v2c - Reserved for SNMPv2c
usm - User-based Security Model (USM)
<security_name> : A string identifying the security name that this entry should belong to. The allowed string length is
(1-32), and the allowed content is ASCII characters from 33 to 126
<group_name> : A string identifying the group name that this entry should belong to. The allowed string length is
To Next Page
Loading...
Need help?
General