Planet MGSW-28240F - Security Switch SNMP Version; Security Switch SNMP Read Community

User’s Manual of MGSW-28240F
439
Parameters:
enable : Enable SNMP
disable: Disable SNMP
(default: Show SNMP mode)
Default Setting:
enable
Example:
Disable SNMP mode.
MGSW
-28240F:/>security switch snmp mode disable
Security Switch SNMP Version
Description:
Set or show the SNMP protocol version.
Syntax:
Security Switch SNMP Version [1|2c|3]
Parameters:
1 : SNMP version 1
2c: SNMP version 2c
3 : SNMP version 3
(default: Show SNMP version)
Default Setting:
2c
Example:
Set SNMP in version 3.
MGSW
-28240F:/>security switch snmp version 3
Security Switch SNMP Read Community
Description:
Set or show the community string for SNMP read access.