Planet MGSW-28240F - DIDO DI Enable; DIDO DO Act

User’s Manual of MGSW-28240F
600
DIDO DI Enable
Description:
Set or show the system digital input0/1.
Syntax:
DIDO Di_en [first|second] [enable|disable] [hightolow|lowtohigh]
Parameters:
first : Digital Input/Output 0
second : Digital Input/Output 1
(default: Set or show digital input/output first(0)/second(1) select)
enable : Enable digital input0/1 function
disable : Disable digital input0/1 function
(default: Set or show digital input/output/fault alarm 0/1 status)
hightolow : Trigger -> high to low
lowtohigh : Trigger -> low to high
(default: Set or show digital input/output 0/1 trigger)
DIDO DO Act
Description:
Set or show the system digital output0/1 action.
Syntax:
DIDO Do_act [first|second] [port|power] [enable|disable]
Parameters:
first : Digital Input/Output 0
second : Digital Input/Output 1
(default: Set or show digital input/output first(0)/second(1) select)
port : port fail
power : power fail
DI1 : DI1 trigger
DI2 : DI2 trigger
(default: Set or show digital output/fault alarm 0/1 action)