Planet MGSW-28240F - Security Network NAS Eapoltimeout; Security Network NAS Agetime

User’s Manual of MGSW-28240F
470
(default: Show current per-port RADIUS-assigned VLAN enabledness)
enable : Enable RADIUS-assigned VLAN either globally or on one or more ports
disable: Disable RADIUS-assigned VLAN either globally or on one or more ports
(default: Show current RADIUS-assigned VLAN enabledness)
Default Setting:
disable
Example:
Enable RADIUS-assigned VLAN.
MGSW
-28240F:/>security network nas radius_vlan enable
Security Network NAS EapolTimeout
Description:
Set or show the time between EAPOL retransmissions.
Syntax:
Security Network NAS EapolTimeout [<eapol_timeout>]
Parameters:
<eapol_timeout>: Time between EAPOL retransmissions (1-65535 seconds)
(default: Show current EAPOL retransmission timeout)
Default Setting:
30
Example:
Set the time between EAPOL retransmissions for 100sec.
MGSW
-28240F:/>security network nas eapoltimeout 100
Security Network NAS Agetime
Description:
Time in seconds between check for activity on successfully authenticated MAC addresses.
Syntax: