Planet MGSW-28240F - Security Network Limit Agetime; Security Network Limit Port

User’s Manual of MGSW-28240F
464
Syntax:
Security Network Limit Aging [enable|disable]
Parameters:
enable : Enable aging
disable : Disable aging
(default: Show current enabledness of aging)
Default Setting:
disable
Example:
Enable limit aging
MGSW
-28240F:/>security network limit aging enable
Security Network Limit Agetime
Description:
Time in seconds between check for activity on learned MAC addresses.
Syntax:
Security Network Limit Agetime [<age_time>]
Parameters:
<age_time>: Time in seconds between checks for activity on a MAC address (10-10000000 seconds)
(default: Show current age time)
Default Setting:
3600
Example:
Set age time in 100sec.
MGSW
-28240F:/>security network limit agetime 100
Security Network Limit Port
Description:
Set or show per-port enabledness.
Syntax: