Planet MGSW-28240F - IP NTP Mode

User’s Manual of MGSW-28240F
400
IP NTP Configuration
Default Setting:
IP NTP Configuration:
=====================
NTP Mode : Disabled
Idx Server IP host address (a.b.c.d) or a host name string
--- ------------------------------------------------------
1 pool.ntp.org
2 europe.pool.ntp.org
3 north-america.pool.ntp.org
4 asia.pool.ntp.org
5 oceania.pool.ntp.org
IP NTP Mode
Description:
Set or show the NTP mode.
Syntax:
IP NTP Mode [enable|disable]
Parameters:
enable : Enable NTP mode
disable : Disable NTP mode
(default: Show NTP mode)
Default Setting:
disable
Example:
Enable NTP mode:
MGSW
-28240F:/>ip ntp mode enable