Planet MGSW-28240F - Aggregation Lookup; Aggregation Mode

User’s Manual of MGSW-28240F
513
Example:
Delete Group2
MGSW
-28240F:/>aggr delete 2
Aggregation Lookup
Description:
Lookup link aggregation.
Syntax:
Aggr Lookup [<aggr_id>]
Parameters:
<aggr_id>: Aggregation ID
Aggregation Mode
Description:
Set or show the link aggregation traffic distribution mode.
Syntax:
Aggr Mode [smac|dmac|ip|port] [enable|disable]
Parameters:
smac : Source MAC address
dmac : Destination MAC address
ip : Source and destination IP address
port : Source and destination UDP/TCP port
enable : Enable field in traffic distribution
disable: Disable field in traffic distribution
Default Setting:
SMAC : Enabled
DMAC : Disabled
IP : Enabled
Port : Enabled