User’s Manual of MGSW-28240F
Example:
Set IP source guard limit
-28240F:/>security network ip source guard 1 1
Security Network IP Source Guard Entry
Description:
Add or delete IP source guard static entry.
Syntax:
Security
Networ
k IP Sou
rce Guard Entr
y [<por
t_list>]
add|delete <
vid> <a
llowed_i
p> <allow
ed_m
ac>
Parameters:
<port_list> : Port list or 'all', default: All ports
add : Add new port IP source guard static entry
delete : Delete existing port IP source guard static entry
<vid> : VLAN ID (1-4095)
<allowed_ip> : IP address (a.b.c.d), IP address allowed for doing IP source guard
<allowed_mac>: MAC address (xx-xx-xx-xx-xx-xx), MAC address allowed for doing IP source guard
Example:
Add IP source guard static entry.
-28240F:/>security network ip source guard entry 1 add 1 192.168.0.20
Security Network IP Source Guard Status
Description:
Show IP source guard static and dynamic entries.
Syntax:
Security Network IP Source Guard Status [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
To Next Page
Loading...
Need help?
General