Planet MGSW-28240F - MEP Command; Mep Config; Mep Peer

User’s Manual of MGSW-28240F
611
6.26 MEP Command
mep config
Description:
MEP instance configuration.
Syntax:
MEP config [<inst>] [mep|mip] [ingress|egress] [<port>] [domport|domevc] [<level>] [itu|ieee] [<meg>] [<mep>] [<vid>] [<flow>]
[enable|disable]
Parameters:
<inst> : Instance number.
mep|mip : Mode of the MEP instance.
ingress|egress: Direction of the MEP instance.
<port> : Port number.
domport|domevc: Flow domain.
<level> : MEP level (0-7).
itu|ieee : MEG format.
ITU: ICC format as defined in Y.1731 ANNEX A.
IEEE: String format Domain Name and Short Name as defined in 802.1ag.
<meg> : MEG ID (max. 8 chars).
<mep> : This MEP id (0-0x1FFF).
<vid> : C-TAG only applicable for Port MEP.
<flow> : Flow instance number (Port/EVC).
enable|disable: enable/disable.
Example:
Add 1
st
instance and indicate residence port to port1, and 1 for flow instance, and Tagged ID is 3001. MEP Peer set to 3
for MEP instance 1.
MGSW
-28240F:/MEP>mep config 1 mep ingress 1 0 itu meg000 3 3001 1 enable
mep peer
Description:
MEP Peer MEP id configuration.