Planet MGSW-28240F - Wiring the AC Power Input; Wiring the DC Power Input

User’s Manual of MGSW-28240F
37
2.1.3 Wiring the AC Power Input
The front panel of the MGSW-28240F indicates an AC inlet power socket, which accepts input power from 100 to 240V AC,
50/60Hz.
2.1.4 Wiring the DC Power Input
The 6-contact terminal block connector on the front panel of MGSW-28240F is used for two DC redundant powers input. Please
follow the steps below to insert the power wire.
1. Insert positive / negative DC power wires into the contacts 1 and 2 for DC POWER 1, or 5 and 6 for DC POWER 2.