User’s Manual of SGSW-24040 / 24240 Series
• A QCL consists of an ordered list of up to 12 QCEs.
• Each QCE can be used to classify certain frames to a specific QoS class.
• This classification can be based on parameters such as VLAN ID, UDP/TCP port, IPv4/IPv6 DSCP or Tag Priority.
• Frames not matching any of the QCEs are classified to the default QoS class for the port.
• The settings relate to the currently selected stack unit, as reflected by the page header.
The Port QoS Configuration screen in Figure 4-9-9 appears.
Figure 4-9-9 Port QoS Configuration page screenshot
To Next Page
Loading...
