User’s Manual of SGSW-24040 / 24240 Series
2.1.3 Switch Rear Panel
The rear panel of the Managed Switch indicates an AC inlet power socket, which accepts input power from 100 to 240V AC,
50-60Hz. Figure 2-7 & Figure 2-11 shows the rear panel of these Managed Switches
SGSW-24040 Rear Panel
Figure 2-7 Rear panel of SGSW-24040
SGSW-24040R Rear Panel
Figure 2-8 Rear panel of SGSW-24040R
SGSW-24040P / SGSW-24040P4 / SGSW-24040HP Rear Panel
Figure 2-9 Rear panel of SGSW-24040P / SGSW-24040P4
SGSW-24240 Rear Panel
Figure 2-10 Rear panel of SGSW-24240
SGSW-24240R Rear Panel
Figure 2-11 Rear panel of SGSW-24240R
■ AC Power Receptacle
For compatibility with electric service in most areas of the world, the Managed Switch’s power supply automatically adjusts
to line power in the range 100-240VAC and 50/60 Hz.
Plug the female end of the power cord firmly into the receptalbe on the rear panel of the Managed Switch. Plug the other
end of the power cord into an electric service outlet then the power will be ready.
To Next Page
Loading...
