User’s Manual of SGSW-24040 / 24240 Series
Stack List
For each switch in the stack, the following information is shown: The MAC address, Switch ID, product name and version,
and master election state. The master election state is normally "No". Only when a forced master election is enforced by the
user, the master election state takes the value "Yes". For details about the master election algorithm, see Stack Configuration.
The Stack List screen in Figure 4-17-8 appears.
Figure 4-17-8 Stack Information page screenshot - Stack List
Master Forwarding Table
As the heading suggests, the information in the table is as seen from the master view.
For each switch in the stack, the following information is shown:
• The MAC address, switch ID, distance information, and the primary forwarding path to the switch.
• For ring topology, a backup path is also provided.
Figure 4-17-9 Stack Information page screenshot - Master Forwarding Table
4.17.4 Stack Port State Ovewview
This page provides an overview of the current switch port states. Clicking on the image of a port opens the Port Statistics
page.The port states are illustrated as follows:
To Next Page
Loading...
