Planet SGSW-24040 - Security Switch SNMP Access Add

User’s Manual of SGSW-24040 / 24240 Series
411
Lookup SNMPv3 view entry.
Syntax:
Security Switch SNMP View Lookup [<index>]
Parameters:
<index>: entry index (1-64)
Example:
Lookup SNMPv3 view entry
SWITCH/>security switch snmp view lookup
Idx View Name View Type OID Subtree
--- -------------------------------- --------- --------------------------------
1 default_view included .1
2 snmpv3_viwe included .1
Number of entries: 2
Security Switch SNMP Access Add
Description:
Add or modify SNMPv3 access entry.
The entry index key are <group_name>, <security_model> and <security_level>.
Syntax:
Security Switch SNMP Access Add <group_name> <security_model> <security_level> [<read_view_name>]
[<write_view_name>]
Parameters:
<group_name> : A string identifying the group name that this entry should belong to
<security_model> : any - Accepted any security model (v1|v2c|usm)
v1 - Reserved for SNMPv1
v2c - Reserved for SNMPv2c
usm - User-based Security Model (USM)
<security_level> : noAuthNoPriv - None authentication and none privacy
AuthNoPriv - Authentication and none privacy
AuthPriv - Authentication and privacy
<read_view_name> : The name of the MIB view defining the MIB objects for which this request may request the current
values
<write_view_name>: The name of the MIB view defining the MIB objects for which this request may potentially SET new