Power over Ethernet (SGSW-24040P / 24040P4 / 24040HP Only)
■ Complies with IEEE 802.3af Power over Ethernet End-Span PSE
■ Complies with IEEE 802.3at high-power Power over Ethernet End-Span PSE (SGSW-24040HP only)
■ Up to 24 ports for IEEE 802.3af devices powered
■ Up to 24 ports for IEEE 802.3at devices powered (SGSW-24040HP only)
■ Support PoE Power up to 15.4 watts for each PoE ports
■ Support PoE Power up to 30.8 watts for each PoE ports (SGSW-24040HP only)
■ Auto detect powered device (PD)
■ Circuit protection prevent power interference between ports
■ Remote power feeding up to 100m
■ PoE Management
■ Total PoE power budget control
■ Pert port PoE function enable/disable
■ PoE Port Power feeding priority
■ Per PoE port power limit
■ PD classification detection
1.5 Product Specification
SGSW Stackable Copper models
Product SGSW-24040 SGSW-24040R
Hardware Specification
Copper Ports 24 10/ 100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
SFP/mini-GBIC Slots 4 SFP interfaces, shared with Port-21 to Port-24
Console Port 1 x RS-232 DB9 serial port (115200, 8, N, 1)
Stacking Ports 2 5GbE / Cross-HDMI interface
Switch Fabric 68Gbps / non-blocking
Address Table 8K entries, automatic source address learning and ageing
Share data Buffer 1392 kilobytes
Switch Processing Scheme Store-and-Forward
Flow Control
IEEE 802.3x Pause Frame for Full-Duplex
Back pressure for Half-Duplex
Jumbo Frame 10Kbytes
Reset Button
< 5 seconds: System reboot
> 10 seconds: Factory Default
Dimension (W x D x H)
440 x 200 x 44.5 mm, 1U high
Weight
SGSW-24040: 3.0kg
To Next Page
Loading...
