Planet SGSW-24040 - LACP Mode; LACP Key

User’s Manual of SGSW-24040 / 24240 Series
479
22 Disabled Auto Active
23 Disabled Auto Active
24 Disabled Auto Active
LACP Mode
Description:
Set or show LACP mode.
Syntax:
LACP Mode [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable LACP protocol
disable: Disable LACP protocol
(default: Show LACP mode)
Default Setting:
disable
Example:
Enable LACP for port1~4
SWITCH/>lacp mode 1-4 enable
LACP Key
Description:
Set or show the LACP key.
Syntax:
LACP Key [<port_list>] [<key>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<key> : LACP key (1-65535) or 'auto'