Planet SGSW-24040 - IP Setup

User’s Manual of SGSW-24040 / 24240 Series
350
Parameters:
enable : Enable or renew DHCP client
disable: Disable DHCP client
Default Setting:
Disable
Example:
Disable DHCP sever:
SWITCH/>ip dhcp disable
IP Setup
Description:
Set or show the IP setup.
Syntax:
IP Setup [<ip_addr>] [<ip_mask>] [<ip_router>] [<vid>]
Parameters:
<ip_addr> : IP address (a.b.c.d), default: Show IP address
<ip_mask> : IP subnet mask (a.b.c.d), default: Show IP mask
<ip_router>: IP router (a.b.c.d), default: Show IP router
<vid> : VLAN ID (1-4095), default: Show VLAN ID
Default Setting:
IP Address : 192.168.0.100
IP Mask : 255.255.255.0
IP Router : 192.168.0.1
DNS Server : 0.0.0.0
VLAN ID : 1
Example:
Set IP address:
SWITCH/>ip setup 192.168.0.100 255.255.255.0