Planet SGSW-24040 - Security Network NAS Reauthentication; Security Network NAS Reauthperiod

User’s Manual of SGSW-24040 / 24240 Series
422
SWITCH/>security network nas state 1
Port Admin State Port State Last Source Last ID
---- ------------------ --------------------- ----------------- ------------------
1 Force Authorized Link Down - -
Security Network NAS Reauthentication
Description:
Set or show Reauthentication enabledness.
Syntax:
Security Network NAS Reauthentication [enable|disable]
Parameters:
enable : Enable reauthentication
disable: Disable reauthentication
(default: Show current reauthentication mode)
Default Setting:
disable
Example:
Enable reauthentication function.
SWITCH/>security network nas reauthentication enable
Security Network NAS ReauthPeriod
Description:
Set or show the period between reauthentications.
Syntax:
Security Network NAS ReauthPeriod [<reauth_period>]
Parameters:
<reauth_period>: Period between reauthentications (1-3600 seconds)
(default: Show current reauthentication period)