Planet SGSW-24040 - 4.16 Power over Ethernet (SGSW-24040 P; SGSW-24040 P4; SGSW-24040 HP)

User’s Manual of SGSW-24040 / 24240 Series
310
4.16 Power over Ethernet (SGSW-24040P / SGSW-24040P4 / SGSW-24040HP)
Providing up to 24 PoE, in-line power interface, the SGSW-24040P / SGSW-24040P / SGSW-24040HP PoE Switch can easily
build a power central-controlled IP phone system, IP Camera system, AP group for the enterprise. For instance, 24 camera / AP
can be easily installed around the corner in the company for surveillance demands or build a wireless roaming environment in
the office. Without the power-socket limitation, the PoE Switch makes the installation of cameras or WLAN AP more easily and
efficiently.
Only SGSW-24040HP has IEEE 802.3at mode and supplies max. power up to 30.8 watts.
Figure 4-16-1 Power over Ethernet Status
4.16.1 Power over Ethernet Powered Device
3~5 watts
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other Ethernet/non-Ethernet
end-devices to the central where UPS is installed for un-interrupt power system
and power control system.