Planet SGSW-24040 - 6.11 Link Aggregation Command

User’s Manual of SGSW-24040 / 24240 Series
475
6.11 Link Aggregation Command
Aggregation Configuration
Description:
Show link aggregation configuration.
Syntax:
Aggr Configuration
Example:
SWITCH/>aggr configuration
Aggregation Mode:
SMAC : Enabled
DMAC : Disabled
IP : Enabled
Port : Enabled
Aggregation Add
Description:
Add or modify link aggregation.
Syntax:
Aggr Add <port_list> [<aggr_id>]
Parameters:
<port_list>: Port list
<aggr_id> : Aggregation ID, global: 1-2, local: 3-14
Default Setting:
disable
Example:
Add port 1~4 in Group1
SWITCH/>aggr add 1-4 1