User’s Manual of SGSW-24040 / 24240 Series
Default Setting:
15
Example:
Set 30sec for server timeout
SWITCH/>security aaa timeout 30
Security AAA Deadtime
Description:
Set or show server dead time.
Syntax:
Security AAA Deadtime [<dead_time>]
Parameters:
<dead_time>: Time that a server is considered dead if it doesn't answer a request (0-3600 seconds)
(default: Show server dead time configuration)
Default Setting:
300
Example:
Set 1000sec for server dead time
SWITCH/>security aaa deadtime 1000
Security AAA RADIUS
Description:
Set or show RADIUS authentication server setup.
Syntax:
Security AAA RADIUS [<server_index>] [enable|disable] [<ip_addr_string>] [<secret>] [<server_port>]
Parameters:
The server index (1-5)
(default: Show RADIUS authentication server configuration)
To Next Page
Loading...
Need help?
General